| Model numbers | Type | Cartridge | Handle |
|---|---|---|---|
| F-529-7MCC, F-529-7MCS | Kitchen, single handle pull-down with soap dispenser, forward-only handle | 974-074; retainer nut 962-075 and 962-085 | Forward-only lever 940-635 series |
The Masey is a current 529 pull-down with a forward-only handle for tight backsplashes. Parts beyond the cartridge are inferred from Pfister’s numbering on the diagram; confirm with Pfister if in doubt.
Before you start. Shut off the two small valves under the sink by turning them clockwise, then open the faucet to confirm the water has stopped. Plug the drain so small parts cannot fall in. You will need a screwdriver, an adjustable wrench or pliers, and for most handles a hex key (an Allen wrench, sold as an inexpensive set at any hardware store). If a shutoff valve will not turn or starts to drip, or anything is corroded and will not loosen with moderate force, stop and see when to call a plumber. New to this? Start here explains the parts and tools in plain language.
Not sure this is your faucet? See how to identify your Pfister cartridge without a model number, or how to find your brand and model.
Taking it apart
- Loosen the set screw at the base of the handle with a hex key and lift the handle.
- Unscrew the retainer nut (962-075 or 962-085).
- Lift the cartridge out. Do not disassemble it.
Repairs for this faucet
- Drip or stiff handle: replace the 974-074
- Spray head 950-283 series (shared with Pasadena); hose 951-291; dock 950-277
- TiteSeal mounting uses no putty; PE-RT supply lines with 3/8 inch fittings
Parts
Faucet Answers is reader supported. Some links to retailers and manufacturers are affiliate links, and purchases made through them may earn a small commission at no extra cost to you. See the affiliate disclosure.