| Model numbers | Type | Valve | Handle |
|---|---|---|---|
| K-560, K-560-VS, K-560-CP | Kitchen, single handle pull-down with Sweep spray and DockNetik | GP1093674 (25 mm ceramic) | Single lever |
The Bellera shares its valve, docking system, and general construction with the Simplice. The wand and hose are its own part numbers.
Before you start. Shut off the two small valves under the sink by turning them clockwise, then open the faucet to confirm the water has stopped. Plug the drain so small parts cannot fall in. You will need a screwdriver, an adjustable wrench or pliers, and for most handles a hex key (an Allen wrench, sold as an inexpensive set at any hardware store). If a shutoff valve will not turn or starts to drip, or anything is corroded and will not loosen with moderate force, stop and see when to call a plumber. New to this? Start here explains the parts and tools in plain language.
Not sure this is your faucet? See how to identify your Kohler cartridge without a model number, or how to find your brand and model.
Taking it apart
- Pop the plug button and loosen the set screw with a 2.5 mm hex key. Lift the handle.
- Unscrew the bonnet by hand.
- Loosen the mounting nut with an adjustable wrench.
- Lift the valve out.
Repairs for this faucet
- Drip from the spout: replace the valve
- Spray wand worn or will not switch: wand kit 1155250
- Hose leak under the sink: hose 1114111-BC
- Hot and cold reversed: swap the supply lines
- Low pressure or spray head problems: Kohler’s elimination test
Parts
- GP1093674 at Kohler.com
- GP1093674 at Home Depot
- 1155250 spray wand kit at Kohler.com
- 1114111-BC hose at Kohler.com
Kohler pageIdentify your cartridgeStart hereWhen to call a plumber
Faucet Answers is reader supported. Some links to retailers and manufacturers are affiliate links, and purchases made through them may earn a small commission at no extra cost to you. See the affiliate disclosure.